| 
The R&D Technical
Services VRS unit was specifically designed to treat the external
exhaust of reflow systems. The VRS is used to minimize fluid
consumption which significantly reduces operating costs.
The model VRS
is a high performance vapor condensing recovery system. A
proprietary condensing column condenses working fluid out
of the exhaust air vented from a Vapor Phase reflow system
and captures it in cooling water. The fluid is trapped and
extracted from the water in a separator making it ready for
immediate reuse. Water chilling is achieved through the effective
use of an ice bank. The chiller unit keeps an ice reserve
in the chiller tank.
| |
The R&D VRS connects
in series with the exhaust vent from a Vapor Phase reflow
system and exhausts to the factory vent system. |
| |
The unit is normally
left on at all times, even when the Vapor Phase machine
is not being operated. This feature allows for generation
of the ice bank, which provides for quick start up. The
unit is designed minimal attention during normal operation. |
| |
|
| Dimensions: |
33.5" L x
34" W x 73" H |
| Weight: |
400 Lbs |
| Electrical Requirements: |
208/240 VAC, 1
Phase, 25A, 60 Hz |
| Initial Fill: |
25 Gallons Water,
.75 Gallons inert working fluid |
| Recovery Efficiency: |
50% to 75% of the Vapor Phase
unit's loss rate |
| |
|
| |
Low Operating
Cost |
| |
Low Maintenance |
| |
Rapid Payback |
| |
Compatible with
most existing makes of Vapor Phase machines |
| |
|
|
